1. Turn off cable box and wait until all monitors show "No Signal" Message. (NOTE: IR sensor in top left corner behind the display)
2. Wait 20-30 seconds after "no signal" message appears for all TVs to turn off automatically.
3. After all TVs have turned off, use the philips remote to turn them back on. (NOTE: When turning the TV's back on, you should hear an audible click. It will take roughly 15-20 seconds for all TVs to turn on. DO NOT press the power button in rapid succession).
4. Once all Tvs have come back on and are displaying a no signal message, turn on the cable box.
5. TVs should turn on in a zig zag formation, starting in the top left.